micom

Simple init file for mico.

Subpackages

Submodules

Classes

Community

A community of models.

Functions

show_versions()

load_pickle(filename)

Load a community model from a pickled version.

Package Contents

class micom.Community(taxonomy, model_db=None, id=None, name=None, rel_threshold=1e-06, solver=None, progress=True, max_exchange=100, mass=1)[source]

Bases: cobra.Model

A community of models.

This class represents a community of individual models. It was designed for microbial communities but may also be used for multi-tissue or tissue-cell mixture models as long as all individuals exist within a single enclosing compartment.

__add_exchanges(reactions, info, external_compartment='e', internal_exchange=1000)[source]

Add exchange reactions for a new model.

__update_exchanges()[source]

Update exchanges.

__update_community_objective()[source]

Update the community objective.

optimize_single(id)[source]

Optimize growth rate for one individual.

optimize_single will calculate the maximal growth rate for one individual member of the community.

Notes

This might well mean that growth rates for all other individuals are low since the individual may use up all available resources.

Parameters:
  • id (str) – The ID of the individual to be optimized.

  • fluxes (boolean, optional) – Whether to return all fluxes. Defaults to just returning the maximal growth rate.

Returns:

The maximal growth rate for the given taxa.

Return type:

float

optimize_all(progress=False)[source]

Return solutions for individually optimizing each model.

Notes

This might well mean that growth rates for all other individuals are low since the individual may use up all available resources. As a consequence the reported growth rates may usually never be obtained all at once.

Parameters:

progress (boolean, optional) – Whether to show a progress bar.

Returns:

The maximal growth rate for each taxa.

Return type:

pandas.Series

optimize(fluxes=False, pfba=False, raise_error=False, atol=None, rtol=None)[source]

Optimize the model using flux balance analysis.

This is the primary accessor for optimization in MICOM and should be used for all optimizations. Different from cobrapy this will not return the full solution by default but only growth rates which is much quicker. You can request a full solution by setting the fluxes and pFBA arguments.

Parameters:
  • slim (boolean, optional) – Whether to return a slim solution which does not contain fluxes, just growth rates.

  • raise_error (boolean, optional) – Should an error be raised if the solution is not optimal. Defaults to False which will either return a solution with a non-optimal status or None if optimization fails.

  • fluxes (boolean, optional) – Whether to return the fluxes as well.

  • pfba (boolean, optional) – Whether to obtain fluxes by parsimonious FBA rather than “classical” FBA. This is highly recommended.

  • atol (float) – Absolute tolerance for the growth rates. If None will use the solver tolerance.

  • rtol (float) – Relative tolerqance for the growth rates. If None will use the solver tolerance.

Returns:

The solution after optimization or None if there is no optimum.

Return type:

micom.CommunitySolution

property abundances
The normalized abundances.

Setting this attribute will also trigger the appropriate updates in the exchange fluxes and the community objective.

Type:

pandas.Series

set_abundance(value, normalize=True)[source]

Change abundances for one or more taxa.

Parameters:
  • value (array-like object) – The new abundances. Must contain one value for each taxon. Can be a named object like a pandas Series.

  • normalize (boolean, optional) – Whether to normalize the abundances to a total of 1.0. Many things in micom asssume that this is always the case. Only change this if you know what you are doing :O

property taxonomy
The taxonomy used within the model.

This attribute only returns a copy.

Type:

pandas.DataFrame

property modification
Denotes modifications to the model currently applied.

Will be None if the community is unmodified.

Type:

str

property exchanges
Return all exchange reactions in the model.

Uses several heuristics based on the reaction name and compartments to exclude reactions that are not exchange reactions.

Type:

list

property internal_exchanges
Return all internal exchanges.

Internal exchanges are exchanges between individual taxa and the medium.

Type:

list

property medium
Return the medium.
property build_metrics
Returns general metrics for database matching.

Only available when built using a model database.

Type:

pd.Series

optcom(strategy='lagrangian', min_growth=0.0, fluxes=False, pfba=True)[source]

Run OptCom for the community.

OptCom methods are a group of optimization procedures to find community solutions that provide a tradeoff between the cooperative community growth and the egoistic growth of each individual [1]. micom provides several strategies that can be used to find optimal solutions:

  • “moma”: Minimization of metabolic adjustment. Simultaneously optimizes the community objective (maximize) and the cooperativity cost (minimize). This method finds an exact maximum but doubles the number of required variables, thus being slow.

  • “lmoma”: The same as “moma” only with a linear representation of the cooperativity cost (absolute value).

  • “original”: Solves the multi-objective problem described in [1]. Here, the community growth rate is maximized simultanously with all individual growth rates. Note that there are usually many Pareto-optimal solutions to this problem and the method will only give one solution. This is also the slowest method.

Parameters:
  • community (micom.Community) – The community to optimize.

  • strategy (str) – The strategy used to solve the OptCom formulation. Defaults to “lagrangian” which gives a decent tradeoff between speed and correctness.

  • min_growth (float or array-like) – The minimal growth rate required for each individual. May be a single value or an array-like object with the same length as there are individuals.

  • fluxes (boolean) – Whether to return the fluxes as well.

  • pfba (boolean) – Whether to obtain fluxes by parsimonious FBA rather than “classical” FBA.

Returns:

The solution of the optimization. If fluxes==False will only contain the objective value, community growth rate and individual growth rates.

Return type:

micom.CommunitySolution

References

cooperative_tradeoff(min_growth=0.0, fraction=1.0, fluxes=False, pfba=False, atol=None, rtol=None)[source]

Find the best tradeoff between community and individual growth.

Finds the set of growth rates which maintian a particular community growth and spread up growth across all taxa as much as possible. This is done by minimizing the L2 norm of the growth rates with a minimal community growth.

Parameters:
  • min_growth (float or array-like, optional) – The minimal growth rate required for each individual. May be a single value or an array-like object with the same length as there are individuals.

  • fraction (float or list of floats in [0, 1]) – The minum percentage of the community growth rate that has to be maintained. For instance 0.9 means maintain 90% of the maximal community growth rate. Defaults to 100%.

  • fluxes (boolean, optional) – Whether to return the fluxes as well.

  • pfba (boolean, optional) – Whether to obtain fluxes by parsimonious FBA rather than “classical” FBA. This is highly recommended.

  • atol (float) – Absolute tolerance for the growth rates. If None will use the solver tolerance.

  • rtol (float) – Relative tolerqance for the growth rates. If None will use the solver tolerance.

Returns:

The solution of the optimization. If fluxes==False will only contain the objective value, community growth rate and individual growth rates. If more than one fraction value is given will return a pandas Series of solutions with the fractions as indices.

Return type:

micom.CommunitySolution or pd.Series of solutions

knockout_taxa(taxa=None, fraction=1.0, method='change', progress=True, diag=True)[source]

Sequentially knowckout a list of taxa in the model.

This uses cooperative tradeoff as optimization criterion in order to get unqiue solutions for individual growth rates. Requires a QP solver to work.

Parameters:
  • taxa (str or list of strs) – Names of taxa to be knocked out.

  • fraction (float in [0, 1], optional) – Percentage of the maximum community growth rate that has to be maintained. Defaults to 100%.

  • method (str, optional) – One of “raw”, “change” or “relative change” that dictates whether to return the new growth rate (raw), the change in growth rate new - old or the relative change ([new - old] / old).

  • progress (bool, optional) – Whether to show a progress bar. On by default.

  • diag (bool, optional) – Whether the diagonal should contain values as well. If False will be filled with NaNs.

Returns:

A data frame with one row for each knockout and growth rates in the columns. Here the row name indicates which taxon has been knocked out and the columns contain the growth changes for all taxa in that knockout.

Return type:

pandas.DataFrame

property scale
Get a scale to improve numerical properties.
to_pickle(filename)[source]

Save a community in serialized form.

Parameters:

filename (str) – Where to save the pickled community.

Return type:

Nothing

micom.show_versions()[source]
micom.load_pickle(filename)[source]

Load a community model from a pickled version.

Parameters:

filename (str) – The file the community is stored in.

Returns:

The loaded community model.

Return type:

micom.Community